An area calculator for six shapes in metres, centimetres, feet, inches or yards, with a room by room total.
| Running total | m² | ft² |
|---|
1 m² = 10.7639 ft². 1 acre = 4,046.86 m². 1 hectare = 10,000 m². Measure walls at floor level and round up when buying materials.
This area calculator works out the area of rectangles, triangles, circles, trapezoids and ellipses in square metres and square feet at the same time. It applies the standard area formulas used in geometry to real jobs such as flooring, carpet, paint, turf and land, and it lets you add several rooms or plots into one running total with every conversion done for you.
Quick answer: For a rectangle, an area calculator multiplies length by width, so a room 4 m by 3.5 m is 14 m², which is 150.7 square feet. A triangle is half the base times the height, and a circle is π times the radius squared. Multiply square metres by 10.764 to get square feet.

In This Guide
What Is an Area Calculator?
An area calculator is a tool that measures how much flat surface a shape covers, given its lengths, and reports it in square units. Area is two dimensional, so the answer is always in square metres (m²), square feet (ft²) or a larger unit such as acres or hectares.
Each shape has its own formula. A rectangle is length × width, a triangle is ½ × base × height, a circle is π × radius², a trapezoid is ½ × (a + b) × height and an ellipse is π × a × b. When you only know a triangle's three sides, Heron's formula finds the area without the height.
How to Use the Area Calculator
Step 1: Choose the Shape
Pick rectangle in the area calculator for most rooms, gardens and walls. Choose triangle for gable ends and corners, circle for round patios or ponds, trapezoid for sloping plots, and ellipse for oval rugs or flower beds.

Step 2: Pick Units and Enter Measurements
Select metres, centimetres, feet, inches or yards, then type the measurements. Use the same unit for every side. If your tape gives feet and inches, the length converter turns them into decimal feet or metres before you enter them.

Step 3: Add Each Area to the Total
Name the area, for example "Hallway", and press Add to total. Repeat for each room or section. This is how you handle L shaped rooms: split them into two rectangles and add both.

Step 4: Read the Results
The area calculator shows the result in your chosen system, the other system underneath, square yards, acres and hectares, and the area with 10% added for cutting waste. The table keeps a running total in m² and ft².

How Do I Calculate Square Footage?
To calculate square footage, measure the length and width in feet and multiply them; a room 15 ft by 12 ft is 180 square feet. Used as a square footage calculator, this tool also accepts metres and converts, because 1 m² equals 10.764 ft².
Worked example: Tom is carpeting an L shaped lounge. He splits it into a main section of 5 m by 4 m (20 m²) and an alcove of 2 m by 1.5 m (3 m²), giving 23 m², or 247.6 sq ft. With 10% extra for cuts and pattern matching he orders 25.3 m². Measured in feet instead, the main section of 16.4 ft by 13.1 ft gives the same answer within rounding.
| Shape | Formula | Example | Area |
|---|---|---|---|
| Rectangle | length × width | 4 m × 3.5 m | 14 m² (150.7 ft²) |
| Square | side × side | 12 ft × 12 ft | 144 ft² (13.38 m²) |
| Triangle | ½ × base × height | base 6 m, height 4 m | 12 m² |
| Triangle (3 sides) | Heron's formula | 3, 4 and 5 m | 6 m² |
| Circle | π × radius² | radius 2 m | 12.57 m² |
| Trapezoid | ½ × (a + b) × height | a 6 m, b 4 m, height 3 m | 15 m² |
| Ellipse | π × a × b | semi axes 3 m and 2 m | 18.85 m² |
How Do I Convert Square Feet to Square Metres?
Divide square feet by 10.764 to get square metres, or multiply square metres by 10.764 to get square feet. A 1,000 sq ft flat is about 92.9 m², and a 100 m² house is about 1,076 sq ft. Do not convert by 3.28, which is the factor for length only, because area units are squared.
For land the numbers get large, so this square metre calculator also shows acres and hectares. One acre is 4,046.86 m² and one hectare is 10,000 m², and the acre to square feet converter handles plots given in acres. UK property listings often show both m² and sq ft, which makes this conversion one of the most searched.
How Much Extra Flooring or Paint Should I Buy?
Most fitters add about 10% to the measured area for cutting and waste, and more for diagonal layouts or patterned carpet. The calculator shows this figure automatically. Packs of laminate or tiles are sold by the square metre, so round up to whole packs and keep a spare for repairs.
For walls, measure the width of each wall and the ceiling height, add the walls together, then take off doors and windows. The wainscoting calculator does this for panelling, and a check against Heron's formula helps for awkward triangular gable walls where the height is hard to reach.
Key Area Calculation Terms Explained
These terms cover the units and formulas behind every area calculator result here, from square metres and square feet to Heron's formula.
- Square metre
- The SI unit of area, the space covered by a square 1 metre on each side. It equals 10.764 square feet, so a room of 14 m² covers about 150.7 square feet.
- Square foot
- An imperial and US unit of area, a square 1 foot on each side, equal to 0.0929 square metres. A room 15 ft by 12 ft covers 180 square feet.
- Heron's formula
- A way to find a triangle's area from its three sides alone. Halve the perimeter to get s, then take the square root of s × (s − a) × (s − b) × (s − c). Sides 3, 4 and 5 give 6.
- Acre
- A unit of land area equal to 4,046.86 square metres or 43,560 square feet. It is still used for land in the UK and US, and 2.471 acres make one hectare.
- Hectare
- A metric unit of land area equal to 10,000 square metres, the area of a square 100 metres on each side. It is the standard unit for farms and large plots in Europe.
</>Embed this calculator on your website
Add the free Area Calculator to your own site or blog. Copy the code below and paste it into an HTML block. It resizes itself and works on phones.
How we checked this tool: the Tools Veria Editorial Team built this tool by hand, checked it against the official rules or published standards where they apply, and tested it against worked examples. Results are estimates for planning, not personal financial or tax advice. Read our editorial policy and disclaimer, or report an error.
Frequently Asked Questions
How do I calculate the area of a room?
Measure the length and width at floor level and multiply them. A room 4.2 m by 3.6 m is 15.12 m², which is 162.8 sq ft. For an L shaped room, split it into rectangles, work out each one and add them together.
How many square feet are in a square metre?
One square metre equals 10.764 square feet, and one square foot equals 0.0929 square metres. So 20 m² is 215.3 sq ft, and 500 sq ft is 46.45 m².
How do I find the area of a circle?
Multiply pi (about 3.1416) by the radius squared. A circular patio with a 2 m radius is 3.1416 × 2 × 2 = 12.57 m². If you only know the diameter, halve it first to get the radius.
How do I find the area of a triangle without the height?
Use Heron's formula with the three side lengths. Add the sides and halve the total to get s, then take the square root of s × (s − a) × (s − b) × (s − c). Sides of 3, 4 and 5 m give 6 m².
How big is an acre in square metres?
One acre is 4,046.86 square metres, or 43,560 square feet. A hectare is bigger at 10,000 square metres, which equals 2.471 acres. Half an acre is therefore 2,023.4 square metres.
Should I measure in metres or feet?
Use whichever your tape measure and the product label use, because the calculator shows both. UK flooring and paint are sold by the square metre, while US products and many property listings use square feet.